How to maintain the vertical packing machine?

How to maintain the vertical packing machine?

  Vertical packaging machines are mainly used in the packaging production of small and medium-sized snacks. The packaging style not only meets the national health standards, but also meets the aesthetic standards of packaging style. And occupy a large market share in the packaging machinery industry, the development and progress of the food market for the vertical packaging machine to bring a broader development market. However, there are still many customers who are not comprehensive enough about the packaging machine, so their understanding of the maintenance of the packaging machine is only rare. In fact, the comprehensive maintenance of vertical packaging machine is divided into three steps, mechanical part, electrical part and mechanical lubrication. For more information, please click "vertical packaging machine purchase question"

 Maintenance of electrical part of vertical packaging machine:

1. The operator of vertical packaging machine shall check whether the thread head at each joint is loose before starting;

2. Dust and other small particles may also affect some functions of the packaging machine. When there is dust on the probe of photoelectric switch and proximity switch, it is easy to cause misoperation, so it should be checked and cleaned frequently;

3. The detailed parts are also the key points of mechanical cleaning, such as cleaning the surface of the transverse sealing electric slip ring with soft gauze dipped in alcohol regularly, and removing the carbon powder on the surface,

4. Some parts of the vertical packaging machine can not be changed at will. Non professionals are not allowed to open the electrical part. The parameters or procedures of the frequency converter, microcomputer and other control elements have been set. Changing at will will will cause the system disorder and the machine can not work normally.

Lubrication of vertical packaging machine:

1. The rolling bearing is the part with serious wear in the machinery, so each rolling bearing should be filled with grease once with a grease gun about two months;

2. Different parts of lubricating oil have different types, such as the shaft sleeve on the packaging film carrier roller, and the shaft sleeve at the front sprocket of the feeding conveyor shall be filled with 40 × mechanical oil timely;

4. Chain lubrication is the most common, and each chain wheel chain should be dripped with mechanical oil with kinematic viscosity greater than 40 × in due time;

5. The clutch is the key to the start-up of the packaging machine. The clutch part should be greased timely.